English
Update FBs-30GMs kernel:

1. Prepare a USB flash drive preformatted with the FAT32 file system.
2. Create a file named Setting0.ini with the content below 
(take kernel update file named package_21c6e243.zip as example) 
and put this file in your USB root directory. 

ACTION=SW_INSTALL
PARAMETER=package_21c6e243.zip

3. Insert the USB flash drive containing Setting0.ini to FBs-30GM.
4. Turn off FBs-30GM and on again, wait until RUN led is yellow: it means the system has finished restarting.
5. Pull out the USB and check its root directory. If a file named Setting0.out exists, 
   it means that the kernel has been changed successfully.




c餤
1.T{USBHЪڥؿ̨Ssetting0.outɮ, Ywsbsetting0.outɮ,
  hsetting0.inioɮ׭nbUSBڥؿ, AUSBW30GM, 30GMs}tδNNw˵F

2.w˧iHݨUSB̥X{@setting0.outɮ, Nwg\w